You have chosen: • 3 Point • Retractable Seat Belt • Bench Seat • Shoulder Anchor Point Above Top of Side Window • Push Button Buckle
Safety tested and approved, sewn, assembled, packaged in the USA and Federal Safety (FMVSS) #209 & #302 Approved!
This is a 3 point seat belt (both lap and across shoulder) for a bench seat.
FMVSS #209 and #302 Federally approved of course!
Webbing extends to 125" out of retractor box. "Yo Wesco, I need to know if this seat belt length will work?" See how to measure with this link! How to Measure for 3 Point Seat Belt Installation
Universal fit - perfect for most any Standard Top, Hardtop car, truck or van.
Be sure to measure your vehicle to ensure that shoulder harness portion of the belt doesn't align too high on the neck. If so, choose our Long Shoulder Sash Seat Belt.
Retracts neatly out of the way when you unbuckle.
Price includes 1 seat belt for one seat / 1 passenger.
Works for both driver or passenger side, front or back seat.
Equipped with ELR Retractor What's That?
Installation and Instructions
Important Note: Ignore the illustrations in the following installation instructions that show the shoulder anchor point located lower than above the top of the side window. The instructions are accurate except that you will be anchoring the shoulder guide Above the top of the side window. Click Here to view detailed installation instructions and diagrams.
Compare the installation instructions to your vehicle to confirm that this seat belt is compatible with your application. The retractor box is H: 4" x W: 4" x D: 3" and you want to make sure that you have sufficient space at the installation point area near or on the floor to accommodate the retractor.
Note: To install a 3 point seat belt, your vehicle must have a manufacturer's shoulder bolt attachment point or you must create one (retrofit one).
How do I create one? Click Here to Find Out!
Note: These seatbelts do NOT have electrical wiring, so they cannot be electrically wired to alarms or airbags.