Conversion Van Seat Belts

This is a special 3-point (both lap belt and shoulder restraint) retractable seat belt with an (8 inch long)long sash guide for the conversion van application where the shoulder sash guide anchor attachment is higher (usually attaches above the side window) than a normal passenger car configuration.

This belt has a longer sash guide to lower the shoulder strap so that it aligns properly with the occupant's neck/shoulder.

Seat belts also for your box truck, work van, cargo van, Econoline or club wagon.

Also for retrofitting some early model or vintage cars / Hardtops.

Click for Installation Instructions

Compare the installation instructions to your car, truck or van to confirm that this seat belt is vehicle compatible.

Safety tested and approved, sewn, assembled, packaged in the USA. Safety first!

This restraint extends to 125" out of the retractor. "Hey Wesco Team, how do I know what length seatbelt I need?" See Easy Measuring Instructions Here

It is universal fit, so it is perfect for most any conversion van.

Retracts neatly out of the way when released.

Price includes 1 seat belt for one seat / passenger.

Works for both passenger or driver side, front or back seat.

It features an ELR Retractor. What's That?

30 colors to choose from, 7 Standard and 23 Custom colors.

Choose Bench or Bucket Seat Application.

Choice of: 8" or 11" Rigid Sleeve End for Low or High Bucket Seats.

And of course Federally Safety Approved #302/#209 and meets Society of Automotive Engineers (SAE) J386 specs!

IMPORTANT NOTE: Some colors of seatbelts have a different "C" end than pictured above Click to View Installation Instructions for these restraints.

For high middle consoles (17" or more when measured from floor to top of console), one 6 inch extension bracket # 6-AB is needed for each seat belt installed (front seat). Click Here 6 inch extension bracket needed for center consoles that are higher than 17 inches. to see how it attaches to the seat belt end.
Note: Does NOT have electrical wiring, so they cannot be electrically wired to alarms or airbags.

These easy to install conversion van seat belts are Federal Motor Vehicle Safety Standards (FMVSS) #209 & #302 Approved push button lap belts. You can choose from 6 different belt lengths. These seatbelts are adjustable non-retractable lap belts only (no shoulder harness). They are universal fit so they will work perfectly on most any conversion van. Price includes 1 seat belt for one seat / passenger. Each optional 212 hardware kit includes all the hardware that you need for 1 person, for one seat.
With Gray, Black, Navy, Tan, Red and Maroon, the plastic portion of the buckle color matches the color of the webbing (strap).

2 point push button lap belt that adjust to a maximum of 60, 74, 90, or 110 total length. Now, also 48 inch and140 inch total lengths available.

60" belt female buckle side: 23 inches
74" belt female buckle side: 32 inches
90" belt female buckle side: 42 inches
110" belt female buckle side: 36 inches
140" belt female buckle side: 46 inches
48" belt female buckle side: 20 inches

These are 2 point retractable push button conversion van seatbelts, lap belt with buckle only (no shoulder harness). These are universal fit, so they are perfect for most any conversion van. They extend to 53" out of the retractor and of course are Federal Motor Vehicle Safety Standards (FMVSS) Approved! You can choose for either a bucket or bench type seat application. Price includes 1 seat belt for one seat / passenger. This is our Short Housing restraint, meaning that it is best used with a low seat configuration. With higher seat applications, choose our Long Housing conversion van seatbelt. To see the optional hardware kit that you can add to your order below Click Here. Click to view our SeatBelt Hardware Page. Safety tested and approved, sewn, assembled, packaged in the USA.
Click Here to view a photo of the type of end that you get with the "Bucket Seat" option.
Click Here to view a photo of the type of end that you get with the "Bench Seat" option. Click to view our 2-Point Retractable Seat Belt Installation Guide! View Colors

Best used with a normal to higher seat application, this is a 2 point retractable lap belt with buckle only (no shoulder harness). These are universal fit, so they are perfect for most any conversion van. You can choose for either bench or bucket seat applications. Price includes 1 seat belt for one seat / passenger. They extend to 53" and of course these seat belts are Federal Motor Vehicle Safety Standards (FMVSS) Approved! To view the optional hardware kit that you can add to your order below Click Here. Click to view our Belt Hardware Page. Click Here to view a photo of the type of end that you get with the "Bucket Seat" option.
Click Here to view a photo of the type of end that you get with the "Bench Seat" option.
Sewn, Safety tested and approved, assembled and packaged in the U.S.A..
Black, Tan, Gray, Navy, Red and Maroon lap seat belts have matching retractor covers. Click to View Click to view our 2 Point Retractable SeatBelt Installation Instructions! See Color Choices

These easy install belts classic retro-look chrome buckle lift lever belt choice of: adjusts to maximum of 60" 74" 90" 110" or 140".

  60" belt: male non-adjustable end: 24 inches
  74" belt: male non-adjustable end: 30 inches
  90" belt: male non-adjustable end: 46 inches
  110" belt: male non-adjustable end: 74 inches
  140" belt: male non-adjustable end: 93 inches.

These seatbelts are lap belts only (no shoulder harness) and are universal fit, so they will fit perfectly in most conversion vans. Each optional 212 bolt kit includes all the hardware that you need for for 1 person, for one seat. Now also available in the colors White and Ivory.
Proudly safety tested and approved, sewn, assembled, packaged in the USA. Click Here to see installation instructions!

These are our bucket seat style 11" seat belt plastic sleeves, that include the sleeve only (no seat belt). Round cap pops on and off for tightening hex bolt on seat belt end. Price includes 1 sleeve.
Available in Black, Navy Blue, Charcoal, Lt Grey and Tan.
Click Here to see side view!

These are our bucket seat style 8" seat belt plastic sleeves, that include the sleeve only (no seat belt). This hard sleeve is for low seat applications. Round cap pops on and off for tightening hex bolt on seat belt end. Price includes 1 sleeve.