Pyrotect SFI 16.1 Approved Bolt-in / Wrap Around Rollbar-Mount Harness Seat Belts 5 Point Harness with optional 6 Point configuration (Double Sub-belt).
6 or 5 point racing seat belt with 3 inch harness and 3 inch lap belt.
50″ adjustable shoulder harness
Choose either Pull-down or Pull-up Lap Belt Tightening
2″ forged quick draw latch and link system (standard latch and link style) with NEW sewn on pull tabs on all adjusters for easy release
Optional Sewn-on Harness Pads
Optional HNR / HANS ready 3 inch to 2 inch upper shoulder harnesses.
Bolt-in hardware on all ends, interchangeable either bolt-in ends or wrap-around ends (bolt-in ends are removable). 3" Roll bar-mount shoulder harness and lap belt interchangeable either with bolt-in ends or wrap-around ends (bolt-in ends are removable) and 2" single sub belt also with bolt-in/wrap-around ends.
Bolt-in end hardware is included on all ends of the restraint, but you can take the hardware off and use the ends as Wrap Around Ends - either option).
You also have the option to remove the Bolt-in ends and purchase optional Snap Ends and if needed, Eye-Bolt kits as well.