Tractor Seat Belts

Non-Retractable Tractor Seat Belt (Push Button Style)

These easy to install tractor seat belts are safety tested and approved, sewn, assembled, packaged in the USA, and are Federal Safety Approved push button lap belts. Meets Society of Automotive Engineers (SAE) J386 specs. You can choose from 6 different belt lengths that can adjust to a maximum of 60, 74, 90 or 110 inches. Now 48 inch and 140 inch lengths are available also.
60" belt female buckle side: 23 inches
74" belt female buckle side: 32 inches
90" belt female buckle side: 42 inches
110" belt female buckle side: 36 inches
140" belt female buckle side: 46 inches
48" belt female buckle side: 20 inches
These seatbelts are non-retractable lap belts only (no shoulder harness). They are universal fit so they will work perfectly on most any tractor. Each optional 212 hardware kit includes all the hardware that you need for 1 person, for one seat. --The orange colored belts have black buckle ends. With black, gray, tan, maroon, red and navy colors, the plastic portion of the buckle color matches the color of the webbing (strap). Optional mounting hardware Click to View. Colors Click to view our 2-Point Lap Belt Installation Guide.

These lap seat belts are 3" wide belts that are adjustable and available in 5 different lengths. Your choice of 60 inch, 74 inch, 90 inch, 110 inch or 140 inch length seat belts when fully extended! Meets SAE J386 Standard.

These are the perfect lap seat belt for the mining industry, earth moving equipment or other heavy equipment where regulations require a 3" wide safety restraint. They are heavy duty 3" wide restraints and the chrome lift lever release latch is perfect for operators that are wearing heavy work gloves (no push buttons to make the belt release...just grab and pull). Optional installation #210 hardware kit Click Here to view.
Click to view our Belt Hardware Page.

3 inch wide webbing (belt).

2 point (lap only) lap belt NON-retractable.

Adheres to SAE J386 standard.

Federal Motor Vehicle Safety Standards (FMVSS) #209 & #302 approved.

Your choice of 60 inch, 74 inch, 90 inch, 110 inch and 140 inch lengths!

Easy and quick release even when wearing gloves.

Optional Choice for Snap End Type End Type What's That?

Available in BLACK ONLY

Click Here to view installation instructions! Click to See Dimensions!

Retractable Tractor Seat Belt (ALR 5" Short Housing Belt)

These are 2 point retractable push button seatbelts, lap belt with buckle only (no shoulder harness). These are universal fit, so they are perfect for most any tractor. They extend to 53" and of course are Federally approved! This is our Short Housing restraint, meaning that it is best used with a low seat configuration. With higher seat applications, choose our Long Housing seatbelt below.

Sewn, assembled, packaged, safety tested and approved in the USA.

Choice of: 8" or 11" Rigid Sleeve End for High or Low Bucket Seats. Or Choose 20" Bench Seat Floppy End.

Optional mounting hardware kit Click to View. Click to view our SeatBelt Hardware Page. Colors Click to view our 2 Point Belt Installation Guide!

8" Long Housing Retractable Tractor Seat Belts

Best used with a higher seat application, this is a 2 point retractable lap belt with buckle only (no shoulder harness). These are universal fit, so they are perfect for most tractors. They extend to 53" out of retractor and of course these seat belts are Federally Safety approved!

Choice of: 11" or 8" Rigid Sleeve End for High or Low Bucket Seats. Or Choose 20" Bench Seat Floppy End.

Safety approved and tested, sewn, assembled, packaged in the USA.

Optional mounting hardware kit Click to View. Click to view our Belt Hardware Page. Color Chart Click to view our 2 Point Belt Installation Guide!

Retractable Tractor Seat Belt 6" Micro-Switch End - Both Circuit Closed and Open

This tractor seat belt is BOTH "Circuit Open" and "Circuit Closed".

Wiring Diagram and Instructions show you how to easily wire the belt for either open or closed!

These 2" wide belts are retractable and have a 3-wire micro-switch that makes sure that the driver buckles up before driving the tractor.

Your choice of either 6 inch, 9 inch or 12 inch long buckle end. Click to See!

Circuit Open: means that the seat belt must be buckled up before the motor will start, preventing drivers from moving the vehicle until they are buckled up.
Or
Circuit Closed: means that if the seat belt is not buckled when the motor is started, then a bell/buzzer can sound alerting that the driver isn't buckled up.

These forklift seat belts work with 12V & 24V Systems.

These are 2-point lap belt only (no shoulder strap) retractable belts. Available in the colors Black and Orange. Federal Motor Vehicle Safety Standards (FMVSS) #209 & #302 Approved and meets Society of Automotive Engineers (SAE) J386 specs.

Webbing (belt) Extends 41-43 inches out of the retractor unit. Add the length of the female buckle end for the Total length from mounting hole to mounting hole.

(The optional mounting hardware includes our 210 hardware kit) Click to View.

Micro-Switch Forklift Tractor Non-Retractable Seat Belt "Circuit Closed" and "Circuit Open"

These 2" wide belts are Non-Retractable and the micro-switch makes sure that your forklift driver buckles up before driving the lift. Federal Motor Vehicle Safety Standards (FMVSS) #209 & #302 Approved and meets Society of Automotive Engineers (SAE) J386 specs. These are 2-point lap belt only (no shoulder strap) Non-Retractable belts that extend to 74 inches. Belt available in Black or Orange.

Your choice of either 6 inch, 9 inch or 12 inch long buckle end. Click to See!

This forklift seat belt is BOTH "Circuit Closed" and "Circuit Open."

Wiring Diagram and Instructions showing how to easily wire for either open or closed.

Circuit Closed: means that if the seat belt is not buckled when the motor is started, then a bell/buzzer can sound alerting that the driver isn't buckled up. Replaces i-1402-circuit-closed.
Or
Circuit Open: means that the seat belt must be buckled up before the motor will start, preventing drivers from moving the vehicle until they are buckled up.

These fork truck seat belts work with 12 volt & 24 volt Systems.

Optional mounting hardware kit Click to View. Click to view our Belt Hardware Page.